Manuals / Paradyne / Computer Equipment / Network Card

Paradyne IPD4000E installation instructions Rack

Models: IPD4000E

1 17

Page 4

1.2.2 Rack

Using a Phillips Screwdriver, attach the two [2] provided rack mount brackets to the sides of the IPD4000E with eight [8] of the ten [10] provided bracket screws. There are seven position options for the rack brackets; position them as best suited to the space available for your chassis on the rack being utilized.

	RACK MOUNT	IPD4000E SIDE VIEW
	BRACKET	IPD4000E SIDE VIEW
	BRACKET

Front

Mount the chassis onto the rack and secure the rack mount brackets to the sides of the rack using one of the two provided sets of eight [8] rack screws (whichever size fits the rack being utilized).

IPD4000E FRONT VIEW

Check the rack for stability, ensuring that installation of the IPD4000E has not caused the rack to become top-heavy.

IPD4000E Installation Instructions 220-0000097 rev01

Page 4 of 17

Page 4

Image 4

Paradyne IPD4000E installation instructions Rack

Contents

Installation Instructions IPD4000ECopyright 2004 Net to Net Technologies, Inc The Net to Net Logo is a trademark of Net to Net Technologies, IncContents 1.0 INSTALLATION2.0 CONFIGURATION AND MANAGEMENT 3.0 ADDITIONAL INFORMATION 1.2 Select a Site for Installation1.2 Select a Site for Installation 1.0 INSTALLATION1.1 Unpack and Inspect the Equipment 1.2.2 Rack 1.3 Install Your Management Module 1.3.1 Install an Uplink Module on the Management Module1.3.2 Identify the Appropriate Slot for Installation 1.3.3 Align the Management Module with the Slot Module Guides1.4.1 Select a Slot for Installation 1.4 Install Your Interface Modules1.3.4 Slide the Management Module Firmly into the Chassis 1.4.2 Align the Interface Module with the Slot Module Guides 1.5 Power Up Your IPD4000E1.4.3 Slide the Interface Module Firmly into the Chassis 1.5.1.1 Connect a Ground Wire to the IPD4000E 1.5.1.2 Connect the Ground Wire to a Frame Ground1.5.1 Establish a Ground Connection 1.5.2 Select a Terminal BlockDC POWER SPECIFICATIONS 1.5.3 Establish a Power Connection1.6 Establish Your Uplink Connections 1.5.4 Verify the Connection1.7.1 Identify the Appropriate RJ21 Connectors 1.7 Connect Your Subscriber Lines1.7.3 Position the RJ21 Connector 1.7.4 Secure the RJ21 ConnectorFEMALE RJ21 CONNECTOR A FOR INTERFACE MODULE SLOT MALE RJ21 CONNECTOR OF YOUR INTERFACE CABLE1.7.5 Verify The Connections 2.0 CONFIGURATION AND MANAGEMENT 1.8 Secure the Connecting Cables3.0 ADDITIONAL INFORMATION 3.1 Fan Module3.2 IPD4000E Interface Capacity 3.3 Technical Support3.4 Regulatory Compliance CUSTOMER LOCATIONTECH SUPPORT EMAIL TECH SUPPORT PHONE3.4.2.2 Industry Canada 3.4.2.3 EuropeCopyright 2004 Net to Net Technologies, Inc The Net to Net Logo is a trademark of Net to Net Technologies, Inc