Patton electronic 2160 user manual SP Example

Model 2160 Series User Manual 4 • Web configuration

•Strictly Priority (SP): The SP Queue Type uses queues that are based on priority only. SP transmits the highest priority queue first, then the next highest priority queue, and so on. However, if there is always some content in the highest priority queue, then the other packets in the rest of queues will not be sent until the highest priority queue is empty. The SP algorithm is preferred when the received packets contain some high priority data, such as voice and video.

Figure 25. SP Example

WRR Configuration. If you selected Type 1 in the Scheduling Configuration section, then provide infor- mation for the WRR table. Assign a weight value (from 1 to 15) to determine the priority for each queue.

Figure 26. QoS - Port Based Priority - WRR Configuration

WFQ Configuration. If you selected Type 2 or Type 3 in the Scheduling Configuration section, then pro- vide information for the WFQ table. Assign the bandwidth for each queue in each port.

Figure 27. QoS - Port Based Priority - WFQ Configuration

Port-Based Priority Table. For the last step, assign queues to their corresponding ports: LAN 1-4, DSL and Sniffing.

Figure 28. QoS - Port Based Priority Table

Advanced Configuration Options 52