Model 2160 Series User Manual | 4 • Web configuration |
|
|
LAN
To configure LAN settings through the WMI:
1.Click on Basic from the main menu. Set up the Operation Mode and Management port, then click Next. Set up the DHCP Server, then click Next to reach the LAN page.
Figure 11. LAN setup page
2.Choose an option for the LAN Type. If you select Disable or Dynamic IP, click Next at the bottom of the screen to save your changes. If you select Static IP, you can enter information for IP, Subnet Mask, Gate- way and DNS Server's IP.
3.If you select Static IP as the LAN Type, enter details in the Static IP section. The default values for Static IP are:
–IP Address: 192.168.2.1
–Subnet Mask: 255.255.255.0
–Gateway: 0.0.0.0
–DNS Server 1: 168.95.1.1
–DNS Server 2: 168.95.192.1
4.Click Next to commit your changes and continue to the Review page (see “Review and save basic setup changes” on page 40).
Basic Configuration Options | 39 |
