Model 2160 Series User Manual | 5 • Console and Telnet configuration |
|
|
You can set up the following options:
•Version: Set to Disable, Version 1 or Version 2.
•Trap host IP address: Enter the dtrap host IP address.
•Community: Enter the community password.
Use the list command to view all SNMP trap host entries.
Supervisor Password and ID
The supervisor ID and password is the last option in the security command menu, but it is the most important menu item. Users who access the Model 2160 via a web browser or console/Telnet must use the supervisor ID and password to configure the Model 2160. You should change the supervisor ID and password after initial configuration.
| ID | Password |
Web Browser | • | • |
Telnet/Console |
| • |
Supervisor Password
To change the supervisor password, move the cursor “ >>” to The default password is root.
passwd in the security menu and press Enter.
Command: admin passwd <pass_conf>
Message: Please input the following information.
Input old Supervisor password: ****
Input new Supervisor password: ********
Supervisor ID
To change the supervisor ID, move the cursor “ >>” to id in the security menu and press Enter. The default ID is root.
Command: admin id <name>
Message: Please input the following information.
Legal user name (ENTER for default) <root>:
Figure 47 on page 62 shows a flowchart of user access functions using the web browser or console/Telnet.
Administration Command Menu | 99 |
