NEC N8406-022 User Security Model configuration, snmp-serveruser <1-16>, name <1-32characters>

User Security Model configuration

You can make use of a defined set of user identities using this Security Model. An SNMP engine must have the knowledge of applicable attributes of a user.

These commands help you create a user security model entry for an authorized user. You need to provide a security name to create the USM entry.

The following table describes the User Security Model Configuration commands.

Table 63 User Security Model Configuration commands

Command	Description
snmp-server user <1-16>	Configures a string up to 32 characters long that represents the name of the
name <1-32 characters>	user. This is the login name that you need in order to access the switch.
	Command mode: Global configuration

snmp-server user <1-16>authentication-protocol {md5shanone} authentication-password

<password>

Configures the authentication protocol and password.

The authentication protocol can be HMAC-MD5-96 or HMAC-SHA-96, or none. The default algorithm is none.

When you configure an authentication algorithm, you must provide a password, otherwise you receive an error message during validation. This command allows you to create or change your password for authentication. Command mode: Global configuration

snmp-server user <1-16>	Configures the type of privacy protocol and the privacy password.
privacy-protocol {desnone}	The privacy protocol protects messages from disclosure. The options are
privacy-password <password>	des (CBC-DES Symmetric Encryption Protocol) or none. If you specify
	des as the privacy protocol, then make sure that you have selected one of
	the authentication protocols (MD5 or HMAC-SHA-96). If you select none as
	the authentication protocol, you receive an error message.
	You can create or change the privacy password.
	Command mode: Global configuration
no snmp-server user <1-16>	Deletes the USM user entries.
	Command mode: Global configuration
show snmp-server user <1-	Displays the USM user entries.
16>	Command mode: All

Configuration Commands 66