System Information commands
The following table describes the System Information commands.
Table 6 System Information commands
Command | Usage |
show | Displays SNMP v3 information. |
| Command mode: All |
show | Displays system information, including: |
| • System date and time |
| • Switch model name and number |
| • Switch name and location |
| • Time of last boot |
| • MAC address of the switch management processor |
| • IP address of IP interface #1 |
| • Hardware version and part number |
| • Software image file and version number |
| • Configuration name |
| • |
| Command mode: All |
show logging messages | Displays most recent syslog messages. |
| Command mode: All |
show access user | Displays User Access information. |
| Command mode: All except User EXEC |
SNMPv3 Information commands
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2 Framework by supporting the following:
•a new SNMP message format
•security for messages
•access control
•remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information commands.
Table 7 SNMPv3 Information commands
Command | Usage |
show | Displays User Security Model (USM) table information. |
| Command mode: All |
show | Displays information about view name, subtrees, mask and |
| type of view. |
| Command mode: All |
show | Displays |
| Command mode: All |
show | Displays information about the group that includes the |
| security model, user name, and group name. |
| Command mode: All |
show | Displays information about the community table. |
| Command mode: All |
show | Displays the Target Address table. |
| Command mode: All |
show | Displays the Target parameters table. |
| Command mode: All |
show | Displays the Notify table. |
| Command mode: All |
show | Displays all the SNMPv3 information. |
| Command mode: All |
Information Commands 15