NEC N8406-022 User Access Control configuration, User ID configuration, characters>, <1-10> level

User Access Control configuration

The following table describes the User Access Control commands.

Table 73 User Access Control Configuration commands

Command	Description
access user <1-10>	Configures the User ID.
	Command mode: Global configuration
access user eject <1-10>	Ejects the selected user from the switch.
	Command mode: Global configuration

access user user- password <1-128

characters>

Sets the user (user) password (maximum of 128 characters). The user has no direct responsibility for switch management. He or she can view switch status information and statistics, but cannot make any configuration changes. Command mode: Global configuration

access user operator- password <1-128

characters>

Sets the operator (oper) password (maximum of 128 characters). The operator manages all functions of the switch. He or she can view all switch information and statistics and can reset ports or the entire switch.

Command mode: Global configuration

access user administrator-password

<1-128 characters>

Sets the administrator (admin) password (maximum of 128 characters). The super user administrator has complete access to all information and configuration commands on the switch, including the ability to change both the user and administrator passwords.

Command mode: Global configuration

show access user	Displays the current user status.
	Command mode: All

User ID configuration

The following table describes the User ID Configuration commands.

Table 74 User ID Configuration commands

Command		Description
access user	<1-10> level	Sets the Class-of-Service to define the user’s authority level.
{useroperatoradministrator}		Command mode: Global configuration
access user	<1-10> name <1-8	Defines the user name of maximum eight characters.
characters>		Command mode: Global configuration
access user	<1-10> password <1-	Sets the user password of up to 128 characters maximum.
128 characters>		Command mode: Global configuration
access user	<1-10> enable	Enables the user ID.
		Command mode: Global configuration
no access user <1-10>enable		Disables the user ID.
		Command mode: Global configuration
no access user <1-10>		Deletes the user ID.
		Command mode: Global configuration
show access	user	Displays the current user ID parameters.
		Command mode: All

Configuration Commands 71