Prestige 153/153X WAN Bridge/Routers
Chapter 12 Telnet Configuration and Capabilities
12.1 About Telnet Configuration
Before the Prestige is properly setup for TCP/IP, the only option for configuring it is through the console port. Once your Prestige is configured, you can use telnet to configure it remotely as shown in Error! Reference source not found..
Telnet from any station |
|
on the Network | TCP/IP Network |
Prestige with |
|
Network IP Address | |
Modem/ISDN TA | PSTN/ISDN Network |
Modem / ISDN TA | |
56 Kbps | PSTN Network |
56 Kbps | (Telephone Line) |
| |
Prestige 128MH |
|
Ethernet LAN
Telnet from any Remote Location
Modem / ISDN TA
Modem
ISDN TA
Figure 12-1. Telnet Configuration on a TCP/IP Network
If your Prestige is configured for IPX but not IP routing in Menu 1, telnet is still available provided you assign the Prestige a correct IP address and subnet mask. When IP routing is disabled, the Prestige can still function as a host.
12.2 Telnet Under SUA
When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the outside will be forwarded to the inside server. So to configure the Prestige via telnet
Telnet Configuration |
