Prestige 153/153X WAN Bridge/Routers

8.2LAN-to-LAN Application

Your Prestige can also be used as a dial-in server for LAN-to-LAN application to provide access for the workstations on a remote network. For your Prestige to be set up as a LAN-to- LAN server, you need to configure the Default Dial-In Setup to set the operational parameters

for incoming calls. Additionally, you must create a remote node for the router on the remote network (See Chapter 5 - Remote node Configuration).

An example of your Prestige being used as a LAN-to-LAN server is shown in Figure 8-2.

Remote Network

Local Network

LAN-to-LAN

Server

Prestige

Prestige

Figure 8-2. Example of a Dial-in Server Application

Dial-in Server Configuration

8-3

Page 119
Image 119
ZyXEL Communications 153X user manual Example of a Dial-in Server Application