Prestige 153/153X WAN Bridge/Routers

Table 8-2.

Default Dial-in Setup Fields (continued)

 

 

 

 

 

Field

 

Description

Option

 

 

 

Dial-In IPX Net. Num.

This field tells your Prestige to provide the remote host with an

[Yes/No]

Supplied By: IPX Pool

IPX network number from the pool. Otherwise, your Prestige

 

 

 

will generate a random IPX network number.

(Default = No)

 

 

 

IPX Start Net. Num.

This field is applicable only if you selected [Yes] in the Dial-In

 

 

 

IPX Net. Num. Supplied By: IPX Pool field. The IPX pool

 

 

 

contains contiguous IPX network numbers and this field

 

 

 

specifies the first one in the pool.

 

 

 

 

IPX Count (1,16)

Enter the number ([1] - [16]) of network numbers in the IPX

[1] to [16]

 

 

Pool. For example, if the starting number is 12345678, and the

 

 

 

count is [2], then the IPX pool will have 12345678 and

 

 

 

12345679.

 

 

 

 

Session Options:

In these fields, you select the filter set(s) to apply to the traffic

Default = blank

Input Filter Sets

between your Prestige and the remote dial-in users. Keep in

 

mind that these filter set(s) will only apply to remote dial-in

 

Output Filter Sets

 

users but not the remote nodes.

 

 

 

 

 

 

You can choose from 12 different filter sets. In addition, you can

 

 

 

link up to 4 filter sets together for further customization, e.g., 1,

 

 

 

5, 9, 12.

 

 

 

Note that spaces and [-] symbol, are accepted in this field. For

 

 

 

more information on customizing your filter sets, see Chapter 9

 

 

 

- Filter Configuration. The default is blank, i.e., no filters.

 

 

 

 

Session Options:

The Idle Timeout sets the limit on the time that the connection

 

Idle Timeout

is idle before the call is automatically disconnected when the

 

Prestige is calling back. The idle timer is reset whenever there

 

 

 

is traffic from the Prestige.

 

 

 

This field will only be used when calling back; otherwise, the

 

 

 

idle timeout is governed by the caller.

 

 

 

 

 

Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

Dial-in Server Configuration

8-7

Page 123
Image 123
ZyXEL Communications 153X user manual Default = blank