|
| Prestige 153/153X WAN Bridge/Routers | ||
Table | Remote Node Profile Menu Fields for | |||
|
|
|
| |
Field |
| Description | Options | |
|
|
|
| |
Edit PPP Options | To edit the PPP options for this remote node, move the | Press space bar | ||
to select [Yes] | ||||
|
| cursor to this field, use the space bar to select [Yes] and | ||
|
| then press [Enter] | ||
|
| press [Enter]. This will bring you to Menu 11.2 - Remote | ||
|
|
| ||
|
| Node PPP Options. For more information on configuring |
| |
|
| PPP options, see the section Editing PPP Options. |
| |
|
|
|
| |
Rem IP Addr |
| This is a required field [?] if IP routing is enabled. Enter |
| |
|
| the IP address of the remote gateway. |
| |
|
|
|
| |
Edit IP/IPX/Bridge Options | To edit the parameters, select [Yes] and press [Enter]. | Press space bar | ||
to select [Yes] | ||||
|
| This will bring you to Menu 11.3 – Remote Node | ||
|
| then press [Enter] | ||
|
| Network Layer Options. For more information on this | ||
|
|
| ||
|
| screen, refer to the chapter pertaining to your specific |
| |
|
| protocol. |
| |
|
|
|
| |
Edit Script Options | To edit the parameters, select [Yes] and press [Enter]. | Select [Yes] then | ||
press [Enter] | ||||
|
| This will bring you to Menu 11.4 – Remote Node Script. | ||
|
|
| ||
|
|
|
| |
Telco Option: |
|
|
| |
Allocated Budget | This field sets a ceiling for outgoing call time to this | Default = 0 | ||
(min) |
| remote node. The default for this field is [0] for no |
| |
|
| budget control. |
| |
Period (hr) |
| This field will set the time interval to reset the above |
| |
|
| outgoing call budget control. |
| |
|
|
| ||
Session Options: | In these fields, enter the filter set(s) you wish to apply to | Default=Blank | ||
|
| the incoming and outgoing traffic between this remote |
| |
Input Filter Sets, | node and your Prestige. You can choose from 12 |
| ||
Output Filter Sets and | different filter sets. In addition, you can link up to 4 filter |
| ||
Call Filter Sets | sets together for further customization, e.g., 1, 5, 9, 12. |
| ||
|
| Note that spaces are accepted in this field. |
| |
|
| For more information on customizing your filter sets, see |
| |
|
| Chapter 9. The default is blank, i.e., no filters defined. |
| |
|
|
|
|
Remote Node Configuration |