
Prestige 153/153X WAN Bridge/Routers
4.2Leased Line Support
A leased line provides a connection that is always up without dialing and modem negotiation, which can take tens of second. The WAN port on the Prestige allows you to connect a leased line modem (async). Obviously, the Connection Type of the WAN port must be selected as [Leased] in Menu 2.1 - Async WAN Port Setup.
Please note that synchronous device support is available only on WAN port 1 and 2 of Prestige 153X.
4.2.1 Dial-up Backup for Leased Line
If you have a
4.2.2 Leased Line Remote Node Profile
From Submenu 11.1.2, select [Leased] in the Connection Type field to go to Submenu 11.1.2 - Remote Node Profile for Leased Line application, as shown in Figure
| Menu 11.1 - Remote Node Profile |
| |
Rem Node Name= | ? | Route= IP |
|
Active= Yes |
| Bridge= No |
|
Connection Type= Leased |
|
| |
Leased Ports= ? |
| Edit PPP Options= No | |
Incoming: |
| Rem IP Addr= ? |
|
Rem Login= ? |
| Edit IP/IPX/Bridge= | No |
Rem Password= | ? |
|
|
Outgoing: |
| Session Options: |
|
My Login= ? |
| Input Filter Sets= |
|
My Password= ? | Output Filter Sets= | ||
Authen= CHAP/PAP | Idle Timeout(sec)= | 300 | |
Backup Line Call Direction= | Both |
|
Device Type= 56K Modem
Pri Backup Phone #= ?
Sec Backup Phone #=
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Figure 4-5. Menu 11.1 - Remote Node Profile for Leased Lines
Remote Node Configuration |