ZyXEL Communications 153X Remote Node Bridging Setup, 2. Menu 11.3 - Remote Node Bridging Options

Prestige 153/153X WAN Bridge/Routers

7.2.1 Remote Node Bridging Setup

Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu

11.1- Remote Node Profile. For bridging-related parameters, you need to configure Menu 11.3 - Remote Node Network Layer Options.

To setup Menu 11.3 - Remote Node Network Layer Options shown in Figure 7-2, follow these steps:

Step 1. In Menu 11.1, make sure the [Bridge] field is set to [Yes].

Step 2. Move the cursor to the [Edit IP/IPX/Bridge] field, then press the space bar to toggle and set the value to [Yes], and press [Enter] to edit Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Options:	IPX Options:
Rem IP Addr:	Dial-On-Query= No
Rem Subnet Mask= N/A	Rem LAN Net #= 00000000
My WAN Addr= N/A	My WAN Net #= 00000000
Single User Account= N/A	Hop Count= 1
Server IP Addr= N/A	Tick	Count= 2
Metric= N/A	W/D	Spoofing(min)= 3
Private= N/A	SAP/RIP Timeout(min)= 3
RIP Direction= N/A
Version= N/A	Bridge Options:
	Dial-On-Broadcast= No
	Ethernet Addr Timeout(min)= 0

Enter here to CONFIRM or ESC to CANCEL:

Figure 7-2. Menu 11.3 - Remote Node Bridging Options

Bridging Setup 7-3