Prestige 153/153X WAN Bridge/Routers
2.8.3 Prestige 153/153X Advanced WAN Port Setup
The Advanced WAN Port Setup Menu allows you to configure additional AT Commands for the WAN device and the call control parameters. Follow the common Advanced WAN Port Setup procedure in this section for both Prestige 153 and 153X
Step 1. In Menu 2.1, move the cursor to the Advanced Setup field and press the space bar to select [Yes], then press [Enter].
Step 2. When Menu 2.1.1 appears, fill in the appropriate AT commands and call control parameters for the WAN device connected to the WAN port, as shown in Figure
Menu 2.1.1 - Advanced WAN Port Setup |
| ||
AT Command Strings: | Call Control |
| |
Dial= atd | Dial | Timeout(sec)= | 60 |
Drop= +++ath | Retry Counter= 0 |
| |
Answer= ata | Retry Interval(sec)= N/A | ||
| Drop | Timeout(sec)= | 20 |
Drop DTR When Hang Up= Yes | Call | Back Delay(sec)= 15 | |
AT Response String:
CLID= NMBR
Called Id= TO
Speed= CONNECT
Enter here to CONFIRM or ESC to CANCEL:
Figure 2-13. Menu 2.1.1 - Advanced WAN Port Setup
Hardware Installation & Initial Setup |
