Prestige 153/153X WAN Bridge/Routers
Table
Table | Edit IPX Static Route Menu Fields |
|
|
Field | Description |
|
|
Server Name | In this field, enter the name of the server. This must be the exact name configured in |
| the NetWare server. |
|
|
Network # | This field contains the internal network number of the remote server that you wish to |
| access. [00000000] or [FFFFFFFF] are reserved. |
|
|
Node # | This field contains the address of the node on which the server resides. If you are using |
| a Novell IPX implementation, this value is [000000000001]. |
|
|
Socket # | This field contains the socket number on which the server will receive service requests. |
| The default for this field is hex [0451]. |
|
|
Type # | This field identifies the type of service the server provides. The default for this field is |
| hex [0004]. |
|
|
Gateway Node | In this field, enter the number of the remote node that is the gateway for this static route. |
|
|
Hop Count and | These two fields have the same meaning as those in the Ethernet setup. |
Tick Count |
|
|
|
Once you have completed filling in the menu, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel to cancel.
IPX Configuration |
