ZyXEL Communications 7 describes the IPX Filter Rule, Prestige 153/153X WAN Bridge/Routers

Prestige 153/153X WAN Bridge/Routers

Table 9-7 describes the IPX Filter Rule.

Table 9-7.	IPX Filter Rule Menu Fields
Field		Description
IPX Packet Type		Enter the IPX packet type (1-byte in hexadecimal) you wish to filter.
		The popular types are (in hexdecimal):
		01 - RIP
		04 - SAP
		05 - SPX (Sequenced Packet eXchange)
		11 - NCP (Netware Core Protocol)
		14 - Novell NetBIOS
Destination/Source Network #		Enter the destination/source network numbers (4-byte in
		hexadecimal) of the packet that you wish to filter.
Destination/Source Node #		Enter in the destination/source node number (6-byte in
		hexadecimal) of the packet you wish to filter.
Destination/Source Socket #		Enter the destination/source socket number (2-byte in hexadecimal)
		of the packets that you wish to filter.
Destination/Source Socket #		Select the comparison you wish to apply to the destination/source
Comp		socket in the packet against that specified above.
Operation		This field is applicable only if one of the Socket # fields is 0452 or
		0453 indicating SAP and RIP packets. There are seven options for
		this field that specify the type of the packet.
		•	None.
		•	RIP Request.
		•	RIP Response.
		•	SAP Request.
		•	SAP Response.
		• SAP Get Nearest Server Request.
		• SAP Get Nearest Server Response

Once you have completed filling in Menu 21.1.3 - IPX Filter Rule, press [Enter] at the message [Press Enter to Confirm] to save your configuration, or press [Esc] to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary.

Filter Configuration 9-13