ZyXEL Communications 153X user manual 25 PAD

Prestige 153/153X WAN Bridge/Routers

Table 2-6.	Prestige 153X Sync/Async WAN Port Setup Menu Fields (continued)
Field	Description	Example
Phone	Enter the telephone number assigned to your line by your telephone
Number	company. Note that your Prestige only accepts digits; do not include
	dashes and spaces in this field.
Clock Source	Use the space bar to select the clock source of the sync device. Default	Space-bar to
	is [External], and the Port Speed field is not applicable ([N/A]).	toggle
		[Internal]
		[External]
Device Type	Use the space bar to select one of the following: Modem / ISDN TA /	Space-bar to
	X.25 PAD / 56K Modem that specifies the WAN device type. This field is	toggle
	not applicable if the Connection Type is set to [Leased].	[Modem]
		[ISDN TA]
		[X.25 PAD]
		[56K Modem]
Port Speed	Use the space bar to select the speed between the Prestige and the	[115200]
	WAN device.	(default)
	Available speeds for Async Device are:
	[9600] / [19200] / [38400] / [57600] / [115200] / [230400] bps
	Available speeds for Sync Device are:
	[2400] / [4800] / [9600] / [14400] / [19200] / [28800] / [56000] / [64000] /
	[128000] / [192000] / [256000] bps
AT Command	Enter an AT command string to initialize the WAN device. When the
String: Init	Connection Type is set to [Switch], you must include AT command	(Default: ats0=0)
	“s0=0” to disable auto-answer; your Prestige will decide when to answer
	the incoming call.
Advanced	To edit the Advanced Setup for this WAN port, move the cursor to this	[Yes/No]
Setup	field, use the space bar to select [Yes] and press [Enter]. This will bring
	you to Menu 2.1.1 - Advanced Setup.

When you complete this menu, press [Enter] to save your configuration, or Esc to cancel. After you press [Enter], the Prestige uses the information you have saved to initialize the WAN Port and the connected modem/ISDN-TA/CSU-DSU.

2-20 Hardware Installation & Initial Setup