ZyXEL Communications 153X Internet Access Setup Menu Fields, Field Description Observation

Prestige 153/153X WAN Bridge/Routers

Table 3-4 contain instructions on how to configure your Prestige for Internet access.

Table 3-4.	Internet Access Setup Menu Fields
Field		Description	Observation
ISP's Name		Enter the name of your Internet Service Provider. (This information	Myisp
		is for identification purposes only.)
ISP IP Addr		Enter the IP Address of the remote gateway at the ISP's site. If you	(optional)
		do not have this data, just leave it blank.
Connection Type		Select [Switch] if you connect to the ISP through a dial-up line;	Space-bar to
		select [Leased] if through a leased line.	toggle
			[Switch/Leased]
Leased Ports		If [Leased] is selected in Connection Type, enter the WAN port
		numbers in this field. Leased Ports can be a single port: (1 to 3),
		or any combination of ports: (e.g., 1,2,3 or 1,3 etc). All leased line
		links specified here are bundled in one connection to your ISP.
		The Connection Type of these WAN ports must also be specified
		as [Leased] in Menu 2.
Pri(mary) Phone #		The first number your Prestige will dial to connect to the ISP if the	(required)
		connection is a dial-up line.
Sec(ondary) Phone		If the primary phone number is busy or does not answer, your	(optional)
#		Prestige will call the Secondary Phone number if specified.
My Login Name		Enter the login name assigned to you by your ISP.	(required)
My Password		Enter the password associated with the login name above. Note	(required)
		that this login name/password pair is only for your Prestige to
		connect to the ISP's gateway. For TCP/IP applications, e.g., FTP,
		you will need a separate login name and password for each
		server.

Internet Access 3-9