ZyXEL Communications Prestige 153/153X WAN Bridge/Routers, Field, Description, Option

Prestige 153/153X WAN Bridge/Routers

Table 4-4 describes the fields in Menu 11.1.2 - Remote Node Profile for Leased Line that are specific to leased lines.

Table 4-4.	Remote Node Profile Menu Fields for Leased Lines
Field		Description	Option
Connection Type: [Leased]		Use space bar to toggle [Switch/Leased], select	[Leased]
		[Leased] and press [Enter].
Leased Port(s)		Enter the Wan Port numbers of this remote node for a
		Leased Line connection. Leased Port(s) can be a
		single port: (1 to 3), or any combination of ports: e.g.,
		1,2,3 or 1,3 or any other combination.
		The Connection Type of these WAN Ports must be
		set to [Leased] in Menu 2 WAN Port Setup. All WAN
		Ports specified in this remote node are bundled in
		one connection.
Incoming: Rem Node Login		Enter the login name this remote node uses when it
Name		calls into your Prestige. The login name in this field
		combined with the Rem Node Password will be used
(*for backup line only)		to authenticate the incoming calls from this node.
Incoming: Rem Node		Enter the password used when this Remote Node
Password		calls into your Prestige.
(*for backup line only)
Outgoing: My Login Name		This is a required field [?] if [Call Direction] is either
		[Both] or [Outgoing]. Enter the login name for your
(*for backup line only)		Prestige when it calls this remote node.
Outgoing: My Password		This is a required field [?] if [Call Direction] is either
		[Both] or [Outgoing]. Enter the password for your
(*for backup line only)		Prestige when it calls this remote node.

4-16 Remote Node Configuration