ZyXEL Communications 153X user manual Power On Your Prestige, Initial Screen

Prestige 153/153X WAN Bridge/Routers

2.4Power On Your Prestige

At this point, you should have connected the console cable, the WAN devices, the Ethernet cable, and the power supply. You can now power on your Prestige by plugging the AC adapter to a power outlet of correct voltage.

Step 1. Initial Screen

When you power on your Prestige, the router performs several internal tests and initializes the WAN devices. After the initialization, the Prestige asks you to press [Enter] to continue, as shown in Figure 2-3.

Copyright (c) 1994 - 1997 ZyXEL Communications Corp. ethernet address: 00:a0:c5:01:23:45

Wan port init ... done Modem 0 init . inactive Modem 1 init . inactive Modem 2 init . inactive

Press ENTER to continue...

Figure 2-3. Power-On Display

2-6 Hardware Installation & Initial Setup