ZyXEL Communications 153X user manual Remote Node Bridge Options, Field Description

Prestige 153/153X WAN Bridge/Routers

Table 7-2 describes the bridging-dependent parameters in the Remote Node Profile and Network Layers menus.

Table 7-2.	Remote Node Bridge Options
Field		Description
Bridge		Make sure this field is set to [Yes].
Edit IP/IPX/Bridge		Press the space bar to change it to [Yes] and press [Enter] to go to the
		Network Layer Options Menu.
Dial-On-Broadcast		This field is necessary for your Prestige on the caller side LAN. When set
		to [Yes], any broadcasts coming from the LAN will trigger your Prestige to
		make a call to this remote node. If it is set to [No], your Prestige will not
		make the outgoing call.
Ethernet Addr Timeout (min)		In this field, enter the time (number of minutes) that you wish your Prestige
		to retain the Ethernet Addr information in its internal tables while the line is
		down. If this information is retained, your Prestige will not have to
		recompile the tables when the line is brought back up.

Once you have completed filling in the Network Layer Options Menu, press [Enter] to return to Menu 11.1. Then press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] to cancel.

7-4 Bridging Setup