ZyXEL Communications 153X user manual Default =

Prestige 153/153X WAN Bridge/Routers

Table 8-2.	Default Dial-in Setup Fields (continued)
Field		Description	Option
Multiple Link Options: Max		Enter the maximum number of ports in an MP bundle	Default = 1
Port		between your Prestige and a remote dial-in user.
Callback Budget		This field sets the budget callback time for all remote	Default = 0
Management: Allocated		dial-in users. The default for this field is [0] for no budget
Budget (min)		control.
Callback Budget		This field sets the time interval to reset the above
Management: Period (hr)		callback budget control.
Dial-In IP Address Supplied		If set to [Yes], the Prestige will allow a remote host to	(Default = Yes)
By: Dial-in User		specify its own IP address.
		If set to [No], the remote host must use the IP address	[Yes/No]
		assigned by your Prestige from the IP pool, configured
		below. This is to prevent the remote host from using an
		invalid IP address and potentially disrupting the whole
		network.
Dial-In IP Address Supplied		This field tells your Prestige to provide the remote host	[Yes/No]
By: IP Pool		with an IP address from the pool. This field is required if
		Dial-In IP Address Supplied By: Dial-in User is set to	(Default = No)
		[No]. You can configure this field even if Dial-in User is
		set to [Yes], in which case your Prestige will accept the
		IP address if the remote peer specifies one; otherwise,
		an IP address is assigned from the pool.
IP Pool: IP Start Addr		This field is applicable only if you selected [Yes] in the
		Dial-In IP Address Supplied By: IP Pool field.
		The IP pool contains contiguous IP addresses and this
		field specifies the first one in the pool.
IP Count (1-3)		In this field, enter the number ([1], [2], or [3]) of	[1], [2], [3]
		addresses in the IP Pool. For example, if the starting
		address is 192.168.135.5 and the count is [2], then the
		pool will have 192.68.135.5 and 192.68.135.6

8-6 Dial-in Server Configuration