ZyXEL Communications 153X user manual Default Dial-In Setup, Menu 13 Default Dial-in Setup

Prestige 153/153X WAN Bridge/Routers

8.3Default Dial-In Setup

This section covers the default dial-in parameters. The parameters in Menu 13 affect incoming calls from all remote dial-in users, and remote nodes until authentication is completed. Once authentication is completed, and if it matches a remote node, your Prestige will use parameters from that particular remote node.

Menu 13 - Default Dial-in Setup

Telco Options:	IP Address Supplied By:
CLID Authen= None	Dial-in User= Yes
	IP Pool= No
PPP Options:	IP Start Addr= N/A
Recv Authen= CHAP/PAP	IP Count(1,3)= N/A
Compression= Yes
Mutual Authen= No	IPX Net Num Supplied By:
PAP Login= N/A	IPX Pool= No
PAP Password= N/A	IPX Start Net Num= N/A
Multiple Link Options:	IPX Count(2,16)= N/A
Max Ports= 2	Session Options:
Callback Budget Management:	Input Filter Sets=
Allocated Budget(min)=	Output Filter Sets=
Period(hr)=	Idle Timeout= 300

Press ENTER to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 8-3. Menu 13 - Default Dial-in Setup

From the Main Menu, enter 13 to go to Menu 13 - Default Dial-in Setup. This section describes how to configure the protocol-independent fields in this menu. For the protocol- dependent fields, refer to the appropriate chapters.

Table 8-2 describes and contains information on how to configure each parameter in Menu 13 - Default Dial-in Setup.

8-4 Dial-in Server Configuration