Prestige 153/153X WAN Bridge/Routers
The following Table
Table 13-3. System Maintenance Menu Diagnostic Test Options
Fields | Description |
|
|
Drop WAN Port | This command drops the call on a WAN port. Selecting this option brings you to |
| the Select WAN Port field to specify the port. |
|
|
Reset WAN Port | This command resets the specified WAN port. Selecting this option brings you to |
| the Select WAN Port field to specify the port |
|
|
Manual Call | This option allows you to manually place a call to a remote node. The |
| Prestige will show you the traces of what is happening during the call setup |
| and PPP negotiation. |
|
|
Redirect to WAN Port | This command redirects the keyboard to the WAN port. Anything you type will |
| be sent to the modem and the modem’s response will be shown on your |
| screen. Selecting this option brings you to the Select WAN Port field to specify |
| the port. |
|
|
Internet Setup Test | This test checks to see if your Internet access configuration is correct. When |
| this option is chosen, your Prestige will call the ISP and perform the PPP |
| negotiations. If everything is working properly, you will see an appropriate |
| response. Otherwise, note the error message and take the appropriate |
| troubleshooting steps. |
|
|
Ping Host | This diagnostic sends an ICMP echo packet to the remote host and shows |
| you the |
| the host is reachable via TCP/IP. |
|
|
Reboot System | This option reboots the system. |
|
|
Command Mode | This option allows you to enter the command mode. This mode allows you to |
| diagnose and test your Prestige using a specified set of commands. |
|
|
System Maintenance |