![](/images/new-backgrounds/1265913/265913181x1.webp)
SuperDVR & H.264 Series Cards | Appendix1 Frequently Asked |
User Manual | Questions |
|
|
Appendix 2.2.3 How to set recycling record mode on the system
Select ‘Recycle’ in basic configuration, refer to
Users can select the percent of used disk space to set up “disk shortage alarm.” You can input percent manually or choose the selectable options such as, 25%, 50%, and 75% to set up. For example, if selecting 50%, an alarm will warn you when your disk space usage reaches 50%.
TIP
It is recommended that you install SuperDVR onto the partition with your Windows system (normally C:), and save recorded files on a different partition: .
Appendix 2.2.4 How to set auto reboot function
When a Microsoft Windows system runs continuously for a couple of days the system may become unstable; therefore, it is suggested you restart the computer every few of days.
In the basic configuration (refer to
If the Windows system shutdown unexpectedly, i.e. power supply is cut off, when computer reboots, SuperDVR system will automatically restart, and keep the settings you have entered.
TIP
Users do not need to enable auto reboot function, but it’s suggested to input the Windows user name and password in the relative area, therefore when the system shuts down unexpectedly, users don’t need to input Windows and SuperDVR user names and passwords.
Appendix 2.2.5 How to quickly setup the schedule record function Press ‘Shift’ or ‘Ctrl’ key, and draw the cursor in corresponding areas to make schedules for multiple channels.
Appendix 2.2.6 What are the byte rates for different image qualities from highest to normal?
The frame rate is 30 fps, bit rate for the highest image quality is about 1.2MByte/s, and for the lowest image quality is about 50KByte/s.
Appendix 2.2.7 The frame rate seems to be lower than what I set
There is frame loss in image switch therefore the real recording frame rate is relatively lower than the theoretic value.
Appendix 2.2.8 Why can’t I select more channels to backup?
Please draw the mouse in the channel selection area, or utilize Shift and Ctrl key for assistance.
91