|
| Error! Use the Home tab to apply |
|
|
| 标题 1 to the text that you want to |
|
SuperDVR & H.264 Series Cards |
| appear here. Error! Use the Home |
|
| tab to apply 标题 1 to the text that |
| |
User Manual |
|
| |
| you want to appear here. |
|
2.1.5 Alarm Board Hardware
Figure2-13Alarm Board
Figure2-14Pins Definition of Alarm Board
Connect J2 to PC serial port and you can use alarm board on SuperDVR system.
2.1.6 Connect Audio Signal
For QSDT4PCRP, connect the audio input device to the microphone connector on the motherboard.
Before installing the Video Capture Card hardware in PCI port of the motherboard, make sure you’ve installed Microsoft DirectX 9.0 or later. Then turn on the computer, the system will display ‘Found new hardware’.
NOTICE: Just click ‘Cancel’ and ignore the
Insert the CD that contains H.264 series capture card driver into the CD tray, and run Setup.exe program to install the driver. The default installation path is ‘C:\Program Files\SuperDVR’.
17