Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.
SuperDVR & H.264 Series Cards User Manual
Figure4-6 Motion Detection Configuration
Definition of the setup items:
1.Sensitivity
Users can set motion detection sensitivity here.
2.Speed
Motion detection speed
3.Block Number Set grid’s number.
4.Defaults
Reset to default settings.
5.Select All
Select the entire area of the channel as detection sensitive
6.Clear
Clear all the detection areas and then you can select a customized detection area using the cursor.
4.3.2 Set Motion Detection Area
If users want to customize the detection area for a certain channel, first select the camera, then select ‘Clear’ and drag the cursor in the box in the left side. You will see a green box appear which shows the motion detection area. You can select a maximum of 16 customized areas for each channel.
4.3.3 Clear Motion Detection Area
By clicking ‘Clear’, you can clear all the selected areas.
32
