Q-See Computer Hardware manual 16View Cameras

Error! Use the Home tab to apply 标题 1 to the text that you want to appear here. Error! Use the Home tab to apply 标题 1 to the text that you want to appear here.

SuperDVR & H.264 Series Cards User Manual

Figure4-16View Cameras

When a channel alarm is triggered, the camera icon will flash a yellow alarm signal. Select ‘Auto Show’, in case of an accidental alarm, an alarming screen will pop out automatically and you can know about the alarming position immediately. Click the camera head by right key to show the screen on the spot.

NOTICE:

1.The map tree currently supports three levels and it is invalid for any more then that.

2.For loading of a picture, when any side of length and width of the picture exceeds size of picture frame, it will be enlarged and shortened proportionally and standard size of picture frame is 833x678.

3.On this interface, click camera by right key to display the spot and the 3316 card does not support this function temporarily.

4.If ‘Auto Show’ is set in case that E-map pops up by automatic alarming, the E-map interface set with ‘Holding Time’ without any operation and alarm will be close automatically. ‘Auto Show’ is invalid when the E-map is opened manually.

5.The map in the E-map is the default demonstration map, and the user can invite an engineering merchant to make the practical map or draw a map by their own according to their actual needs, then scan and save it in the computer to picture.

40