SNMPv3 Target Address Table information
The following command displays SNMPv3 target address information:
show
Command mode: All
Name | Transport Addr | Port | Taglist | Params |
trap1 | 47.81.25.66 | 162 | v1v2trap | v1v2param |
|
|
|
|
|
This command displays the SNMPv3 target address table information, which is stored in the SNMP engine. The following table describes the SNMPv3 Target Address Table information.
Table 13 Target Address Table information
Field | Description |
Name | Displays the locally arbitrary, but unique identifier associated with this snmpTargetAddrEntry. |
Transport Addr | Displays the transport addresses. |
Port | Displays the SNMP UDP port number. |
Taglist | This column contains a list of tag values which are used to select target addresses for a |
| particular SNMP message. |
Params | The value of this object identifies an entry in the snmpTargetParamsTable. The identified |
| entry contains SNMP parameters to be used when generating messages to be sent to this |
| transport address. |
SNMPv3 Target Parameters Table information
The following command displays SNMPv3 target parameters information:
show
Command mode: All
Name | MP Model | User Name | Sec Model Sec Level | |
v1v2param | snmpv2c | v1v2only | snmpv1 | noAuthNoPriv |
|
|
|
|
|
The following table describes the SNMPv3 Target Parameters Table information.
Table 14 Target Parameters Table information
Field | Description |
Name | Displays the locally arbitrary, but unique identifier associated with this snmpTargeParamsEntry. |
MP Model | Displays the Message Processing Model used when generating SNMP messages using this |
| entry. |
User Name | Displays the securityName, which identifies the entry on whose behalf SNMP messages will be |
| generated using this entry. |
Sec Model | Displays the security model used when generating SNMP messages using this entry. The system |
| may choose to return an inconsistentValue error if an attempt is made to set this variable to a |
| value for a security model which the system does not support. |
Sec Level | Displays the level of security used when generating SNMP messages using this entry. |
Information Commands 19