Global commands
Some basic commands are recognized throughout the ISCLI hierarchy. These commands are useful for obtaining online Help, navigating through the interface, and saving configuration changes. To get help about a specific command, type the command, followed by help.
The following table describes the global commands.
Table 4 Global commands
Command | Action |
? | Provides more information about a specific command or lists |
| commands available at the current level. |
exit | Go up one level in the |
copy | Write configuration changes to |
exit or quit | Exit from the command line interface and log out. |
ping | Verify |
| format is as follows: |
| ping <host name> <IP address> [<number of |
| tries>] [<msec delay>] |
| • IP address is the hostname or IP address of the device. |
| • number of tries (optional) is the number of attempts |
| |
| • msec delay (optional) is the number of milliseconds between |
| attempts. |
traceroute | Identifies the route used for |
| the network. The format is as follows: |
| traceroute <host name> <IP address> |
|
|
| • IP address is the hostname or IP address of the target |
| station. |
| • |
| |
| • msec delay (optional) is the number of milliseconds to wait |
| for the response. |
telnet | Allows you to Telnet out of the switch. The format is as follows: |
| telnet <host name> <IP address> [<port |
| number>] |
show history | Displays the 10 most recent commands. |
Enables or disables console logs for the current session. | |
who | Displays a list of users who are currently logged in. |
ISCLI basics 12