NEC N8406-022 SNMPv3 Group configuration, SNMPv3 Community Table configuration, <1-32>, <1-16>

Table 65 View-based Access Control Configuration commands

Command	Description
show snmp-server access	Displays the View-based Access Control configuration.
<1-32>	Command mode: All

SNMPv3 Group configuration

The following table describes the SNMPv3 Group Configuration commands.

Table 66 SNMPv3 Group Configuration commands

Command	Description
snmp-server group <1-16>	Defines the security model.
security {usmsnmpv1snmpv2}	Command mode: Global configuration
snmp-server group <1-16>	Sets the user name. The user name can have a maximum of 32
user-name<1-32 characters>	characters.
	Command mode: Global configuration
snmp-server group <1-16	The name for the access group. The group name can have a maximum
group-name<1-32 characters>	of 32 characters.
	Command mode: Global configuration
no snmp-server group <1-16>	Deletes the vacmSecurityToGroup entry.
	Command mode: Global configuration
show snmp-server group <1-	Displays the current vacmSecurityToGroup configuration.
16>	Command mode: All

SNMPv3 Community Table configuration

These commands are used for configuring the community table entry. The configured entry is stored in the community table list in the SNMP engine. This table is used to configure community strings in the Local Configuration Datastore (LCD) of SNMP engine.

The following table describes the SNMPv3 Community Table Configuration commands.

Table 67 SNMPv3 Community Table Configuration commands

Command	Description
snmp-server community <1-16>	Configures the unique index value of a row in this table. The index can
index <1-32 characters>	have a maximum of 32 characters.
	Command mode: Global configuration
snmp-server community <1-16>	Defines the name, up to 32 characters.
name <1-32 characters>	Command mode: Global configuration
snmp-server community <1-16>	Defines a readable 32 character string that represents the corresponding
user-name<1-32 characters>	value of an SNMP community name in a security model.
	Command mode: Global configuration

snmp-server community <1-16>tag <1-255 characters>

Configures a tag of up to 255 characters maximum. This tag specifies a set of transport endpoints to which a command responder application sends an SNMP trap.

Command mode: Global configuration

no snmp-server community	Deletes the community table entry.
<1-16>	Command mode: Global configuration
show snmp-server community	Displays the community table configuration.
<1-16>	Command mode: All

Configuration Commands 68