NEC N8406-022 manual Operations Commands, Operations-levelport options, Introduction

Operations Commands

Introduction

Operations-level commands are used for making immediate and temporary changes to switch configuration. Operations commands are used for bringing ports temporarily in and out of service. These commands are available only from an administrator and operator login.

The following table describes basic Operations commands. The following sections provide more detailed information and commands.

Table 110 Operations commands

Command	Description
password	Allows the user to change the password. You need to enter the current password in
	use for validation.
clear logging	Clears all Syslog messages.
	Command Mode: Priv EXEC
ntp send	Allows the user to send requests to the NTP server.
	Command Mode: Priv EXEC

Operations-level port options

Operations-level port options are used for temporarily disabling or enabling a port.

Table 111 Operations-Level Port commands

Command	Description
[no] rmon	Enables or disables Remote Monitoring for the port. RMON must be enabled
	for any RMON configurations to function.
	Command mode: Interface port

no interface gigabitethernet <port number> shutdown

Temporarily enables the port. The port will be returned to its configured operation mode when the switch is reloaded.

Note: This command does not enable a port that has been disabled by an ekeying mismatch error.

Command Mode: Priv EXEC

interface gigabitethernet	Temporarily disables the port. The port will be returned to its configured
<port number> shutdown	operation mode when the switch is reloaded.
	Command Mode: Priv EXEC
show interface	Displays the current settings for the port.
gigabitethernet <port	Command Mode: Priv EXEC
number> operation

Operations Commands 92