Table 44 TCP statistics
Statistics | Description |
tcpRetransSegs | The total number of segments retransmitted, that is, the number of TCP segments |
| transmitted containing one or more previously transmitted octets. |
tcpInErrs | The total number of segments received in error (for example, bad TCP checksums). |
tcpCurBuff | The total number of outstanding memory allocations from heap by TCP protocol |
| stack. |
tcpCurConn | The total number of outstanding TCP sessions that are currently opened. |
tcpOutRsts | The number of TCP segments sent containing the reset (RST) flag. |
UDP statistics
The following command displays UDP statistics:
show ip udp counters
Command mode: All except User EXEC
| UDP statistics: |
|
|
|
| udpInDatagrams: | 54 | udpOutDatagrams: | 43 |
| udpInErrors: | 0 | udpNoPorts: | 1578077 |
|
| |||
The following table describes the User Datagram Protocol (UDP) statistics: | ||||
Table 45 UDP statistics |
|
|
| |
Statistics | Description |
|
| |
udpInDatagrams | The total number of UDP datagrams delivered to the switch. | |||
udpOutDatagrams | The total number of UDP datagrams sent from this switch. | |||
udpInErrors | The number of received UDP datagrams that could not be delivered for reasons | |||
|
| other than the lack of an application at the destination port. | ||
udpNoPorts | The total number of received UDP datagrams for which there was no application at | |||
|
| the destination port. |
|
Statistics commands 51