4.0 INSTALLATION

The NetLink-T1™ is equipped with DTE, network, and power interfaces. This section briefly describes connection to each.

4.1 DTE INTERFACE CONNECTION

The DTE interface is a V.35 DCE presented as an M/34 male con- nector. This interface is designed to plug directly into a DTE interface (See Appendix D for V.35 interface pin assignments).

4.2 NETWORK INTERFACE CONNECTION

The Network Line Interface is an eight position keyed modular jack configured as a RJ-48C. This interface will need to be configured to match the line parameters (i.e. framing, line coding, etc.) supplied by the central office.

RJ-48C Jack

 

 

Signal Name

 

 

1

1

(RX) Receive (Ring)

 

 

2

(RX) Receive (Tip)

 

 

 

2

3

Shield

 

 

 

3

 

4

(TX) Transmit (Ring)

 

 

 

 

4

 

 

 

 

 

 

 

5

(TX) Transmit (Tip)

 

 

 

 

5

 

 

 

 

66 Shield

77 No connection

88 No connection

Figure 3. NetLink-T1™twisted pair line interface.

NOTE: If the NetLink-T1™ is being used for private short range modem applications, the twisted pair cable connected to its port will need to be a cross-over cable. See Appendix D for Interface pin assignments.

4.3 POWER CONNECTION

The NetLink-T1™ offers three ways to supply external power: AC power, DC power and interface power.

4.3.1 Using the AC Power Supply (120VAC or 100-240VAC)

The NetLink-T1™ uses a 5VDC, 300mA 120VAC or universal input

100-240VAC, power supply. The universal input power supply is equipped with a male IEC-320 power entry connector. This power sup- ply connects to the NetLink-T1™ by means of a barrel jack on the rear panel. There are a variety of international power cords available for the universal power supply. The NetLink-T1™ powers up as soon as it is plugged into an AC outlet–there is no power switch.

4.3.2 Supplying DC Power

You may bypass the DC wall adapter and supply DC power directly to the NetLink T1™ power supply jack. DC power supplied must be 5VDC ±5%, 300mA minimum, center positive, and can be supplied via a barrel type plug with 2.1/5.5/10mm I.D./O.D./Shaft Length dimen- sions.

4.3.3 Supplying Power via pin KK

You may also supply DC power directly to pin KK of the V.35 inter- face. DC Power supplied to pin KK must be 5VDC ± 5%, 300mA mini- mum.

NOTE: NetLink-T1™ is factory configured to accept power from the enclosed DC wall adapter (See Sections 4.3.1 and 4.3.2 above). If you wish to supply power via pin KK on the interface, you must change the setting of the power supply jumper on the printed circuit board See Appendix E. All power sources must be SELV (Circuit, Safety Extra Low Voltage) specified. (See CEN- ELEC EN60950, Section 1.2.8.5)

31

32

Page 16 Page 18
Page 17
Image 17
Patton electronic 2710 user manual DTE Interface Connection, Network Interface Connection, Power Connection
Page 16 Page 18

2710 specifications

The Patton Electronic 2710 is a versatile IoT (Internet of Things) device that has garnered attention for its robust capabilities in facilitating reliable communication and seamless data transmission. Tailored for various industrial applications, this product stands out with its blend of cutting-edge technologies and practical features, making it an essential tool for businesses looking to enhance their connectivity infrastructure.

One of the main features of the Patton 2710 is its multi-interface support. This device is equipped with a variety of ports, including serial interfaces like RS-232, RS-485, and RS-422, as well as Ethernet and USB connectivity options. This versatility allows it to connect seamlessly with different devices and systems, from legacy equipment to modern networked devices, enabling efficient data exchange and communication across a variety of protocols.

The Patton 2710 also boasts robust protocol support, including various telecommunications and networking protocols such as TCP/IP, UDP, and SNMP. This extensive compatibility ensures that it can operate effectively in diverse environments, whether in a factory setting monitoring machinery or in a smart city application controlling infrastructure systems. With its support for these protocols, users can implement advanced monitoring and management solutions, improving operational efficiency and reducing downtime.

In terms of technology, the Patton 2710 features advanced security measures that safeguard the integrity of the data being transmitted. With built-in encryption and secure communication protocols, users can rest assured that their sensitive information remains protected against potential cyber threats. This is increasingly important in today's digitally interconnected landscape, where data breaches can have serious repercussions.

The device is also designed for ease of use and installation. Its intuitive web-based management interface simplifies configuration and monitoring, allowing users to set up the device quickly without extensive technical knowledge. This user-friendly design empowers organizations to implement the device across their operations with minimal training and support.

Another significant characteristic of the Patton 2710 is its rugged build quality. Designed to withstand harsh industrial environments, the device is often housed in enclosures that protect it from dust, moisture, and extreme temperatures. This durability ensures that it can operate reliably in demanding conditions, making it suitable for a wide range of industries, from manufacturing to transportation.

In summary, the Patton Electronic 2710 stands out as a powerful tool for enhancing connectivity and facilitating IoT applications. With its multi-interface capabilities, robust protocol support, advanced security features, user-friendly design, and rugged build, it provides businesses with the reliable solutions they need to thrive in an increasingly connected world.
Top Page Image Contents