Patton electronic 2710 user manual PATTON NETLINK-T1 MODEL INTERFACE PIN ASSIGNMENT

APPENDIX D

PATTON NETLINK-T1™ MODEL 2710

INTERFACE PIN ASSIGNMENT

RJ-48C T1 (DS0) Network Interface

(Female Modular Jack)

Pin #	Signal	} From Network
1	RX Data (RING)
2	RX Data (TIP)
4	TX Data (RING)	} To Network
5	TX Data (TIP)
	TRS Jack (RS-232 Control Port
	Signal
Pin #	Source
Tx Data	From Model 2710
Rx Data	To Model 2710
Sleeve	N/A

RS-232 Control Port (Signals at DB-25 Connector)

	Signal
Pin #	Source	Signal Direction
3	Receive	From 2710
2	Transmit Data	To 2710
7	Ground

RS-232 Control Port (Signals at DB-9 Connector)

	Signal
Pin #	Source	Signal Direction
3	Receive	From 2710
2	Transmit Data	To 2710
7	Ground

APPENDIX D

(continued)

PATTON NETLINK-T1™ MODEL 2710

INTERFACE PIN ASSIGNMENT

M/34 Connector, Terminal Interface

Pin # Signal

AGND (Earth Ground/Shield)

BSGND (Signal Ground)

DCTS (DCE Source)

EDSR (DCE Source, Always On)

FCD (DCE Source)

L LL (Local Loop, DTE Source)

MTM (Test Mode Indicator, DCE Source)

NRL (Remote Loop, DTE Source)

PTD (Transmit Data +, DTE Source)

R RD (Receive Data +, DCE Source)

S TD/ (Transmit Data -, DTE Source)

T RD/ (Receive Data -, DCE Source)

U XTC (Transmit Clock +, DTE Source)

V RC (Receiver Clock +, DCE Source)

W XTC/ (Transmit Clock -, DCE Source)

X RC/ (Receiver Clock -, DCE Source)

Y TC (Transmitter Clock +, DTE Source)

AA TC/ (Transmitter Clock -, DTE Source)

KK Aux. Power Input (+5VDC @ 300mA)

41 42