1.6 SERVICE INFORMATION
All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Support at:
tel: (301) 975-1007
email: support@patton.com
www:http://www.patton.com
NOTE: Packages received without an RMA number will not be accepted.
Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 2710. Technical Services hours: 8AM to 5PM EST,
Monday through Friday.
2.0 GENERAL INFORMATION
Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions arise during installa- tion or use of the unit, contact Patton Electronics Technical Services at (301) 975-1007.
2.1FEATURES
•Terminates T1/FT1 Circuits over a 4-Wire RJ-48C interface
•Connects to standard CPE Serial Interfaces
•Common Framed nx56/64 rates up to 1.536 Mbps
•Unstructured Rates at 1.544 Mbps
•D4 or ESF Framing Modes
•Supports AMI or B8ZS/B7ZS Line Coding
•Configuration via Software Control Port or Internal DIP Switches
•Seven Easy-to-Read LED Indicators Monitor Data & Diagnostics
•Internal, External or Receive Recover Clocking
•Also Operates as a High-Speed Point-to-Point Modem
•Compact Size Plugs Directly into a Router, Switch or other DTE
•Made in USA
2.2GENERAL PRODUCT DESCRIPTION
The NetLink-T1™Model 2710 Series are single port T1/FT1 CSU/DSUs that provide high-speed WAN connectivity in an ultra-com- pact housing. Plugging directly into the V.35 WAN port of a switch, router or multiplexer, the NetLink-T1™ provides T1 or FT1 access at connection at data rates of 1.544 Mbps, nx64, and nx56 (n=1 to 24 channels). The Netlink-T1™ is an excellent choice when terminating leased line services, Frame Relay backbones, internet access as well as LAN-to-LAN services.
The Netlink-T1™ provides digital access to a local WAN service provider or directly between two facilities over a dedicated 4-Wire cir- cuit. LAN bandwidth, framing and coding options are programmed via internally accessible DIP switches or via a rear-mounted EIA-232 con- trol port. The Netlink-T1™ supports D4/ESF framing options and AMI/B8ZS/B7ZS line coding. Netlink-T1™ also supports a full range of system and diagnostic features that make system setup easy.
The NetLink-T1™ provides T1 terminations over a modular RJ-48C jack and comply with jitter tolerance capabilities as specified in ANSI T1.403 and AT&T TR62411. External power options include 120VAC and Universal Interface 100-240VAC.