Patton electronic 2977 manual

Model 2977 DialFire RAS User Guide 2 • Preparation

DialFire PTE ISDN T1 (PRI), Long-Haul (External T1) Configuration Worksheet

Use the worksheet below to collect the information that may be required to complete the configuration of your DialFire PTE adapter within your operating system environment.

Note The parameters on this page are for ISDN T1 (PRI) connected directly to an exter- nal T1 telephone line (Long Haul). If your adapter is connected to a PBX or similar in-house network, use the ISDN T1 (PRI), Short Haul (PBX or Other Internal Net- work) configuration worksheet (page 27).

Parameter			Value
Coding	[ ] B8ZS
Framing	[ ] ESF
Long Haul Line Build	[ ] 0dB [ ] 7.5 dB	[ ] 15 dB [ ] 22.5 dB
Out (Level)
Signaling	[ ] AT&T 5ESS [ ] Nortel DMS 100/250 [ ] ETSI (Euro ISDN)			[ ] INS-1500 (Japan)
	[ ] National ISDN2	[ ] None
NFAS Master Port (RAS	[ ] None		Interface ID for Port 1(0–127):	Interface ID for Port 2
48 PT2 Only)	[ ] 1 [ ] 2		________	(0–127): ________
Leased Time Slots	List which, if any, PRI time slots		are leased:
Modem Nationality	Enter the country in which the PTE adapter will be installed:

DialFire PTE ISDN T1 (PRI), Long-Haul (External T1) Configuration Worksheet 25