Connect to a network with Windows

Supported network protocols

To connect a networking-equipped product to a network, you need a network that uses one or more of the following protocols.

TCP/IP (IPv4 or IPv6)

LPD Printing

SLP

WS-Discovery

Install the product on a wired network with Windows

NOTE: Use this procedure if you are not using the HP Smart Install.

Obtain the IP address

1.Connect the network cable to the product and to the network. Turn the product on.

2.Wait for 60 seconds before continuing. During this time, the network recognizes the product and assigns an IP address or host name for the product.

3.At the product control panel, press the Setup button.

4.Touch the Reports menu, and then touch the Configuration Report button to print the configuration report.

ENWW

Connect to a network with Windows

65

Page 81
Image 81
HP M375, M475 manual Connect to a network with Windows, Supported network protocols, Obtain the IP address