Clean the product
Clean the paper path
During the printing process, paper, toner, and dust particles can accumulate inside the product. Over time, this buildup can cause
Clean the paper path from the product control panel
1.From the Home screen, touch the Setup button.
2.Touch the Service menu.
3.Touch the Cleaning Page button.
4.Load plain letter or A4 paper when you are prompted.
5.Touch the OK button to begin the cleaning process.
A page feeds through the product slowly. Discard the page when the process is completed.
NOTE: For models that do not have an automatic duplexer, the product prints the first side and then prompts you to remove the page from the output bin and reload it in Tray 1, keeping the same orientation.
Clean the scanner glass strip and platen
Over time, specks of debris might collect on the scanner glass and white plastic backing, which can affect performance. Use the following procedure to clean the scanner glass and white plastic backing.
1.Use the power switch to turn off the product, and then unplug the power cord from the electrical socket.
2.Open the scanner lid.
ENWW | Clean the product 241 |