Connect with USB

NOTE: Use this procedure if you are not using the HP Smart Install.

This product supports a USB 2.0 connection. Use an A-to-B type USB cable. HP recommends using a cable that is no longer than 2 m (6.5 ft).

CAUTION: Do not connect the USB cable until the installation software prompts you to connect it.

CD installation

1.Quit all open programs on the computer.

2.Install the software from the CD, and follow the onscreen instructions.

3.When prompted, select the Directly connect to this computer using a USB cable option, and then click the Next button.

4.When the software prompts you, connect the USB cable to the product and the computer.

5.At the end of the installation, click the Finish button.

6.On the More Options screen, you can install more software, or click the Finish button.

7.Print a page from any program to make sure that the printing software is correctly installed.

64

Chapter 5 Connect the product with Windows

ENWW