Use HP ePrint

Use HP ePrint to print documents by sending them as an e-mail attachment to the product's e-mail address from any e-mail enabled device.

NOTE: The product must be connected to a wired or wireless network and have Internet access to use HP ePrint.

1.To use HP ePrint, you must first enable HP Web Services.

a.From the Home screen on the product control panel, touch the Web Services button.

b.Touch the Enable Web Services button.

2.From the HP Web Services menu, touch the Display E-Mail Address button to display the product's e-mail address on the control panel.

3.Use the HP ePrintCenter Web site to define security settings and to configure default print settings for all HP ePrint jobs sent to this product.

a.Go to www.hpeprintcenter.com.

b.Click Sign In, and enter your HP ePrintCenter credentials or sign up for a new account.

c.Select your product from the list, or click + Add printer to add it. To add the product, you need the printer code, which is the segment of the product e-mail address that is before the @ symbol.

NOTE: This code is valid for only 24 hours from the time you enable HP Web Services. If it expires, follow the instructions to enable HP Web Services again, and obtain a new code.

d.To prevent your product from printing unexpected documents, click ePrint Settings, and then click the Allowed Senders tab. Click Allowed Senders Only, and add the e-mail addresses from which you want to allow ePrint jobs.

e.To set up default settings for all ePrint jobs sent to this product, click ePrint Settings, click Print Options, and select the settings that you want to use.

4.To print a document, attach it to an e-mail message sent to the product's e-mail address.

ENWW

Use HP ePrint 123