Link speed and duplex settings

NOTE: This information applies only to Ethernet networks. It does not apply to wireless networks.

The link speed and communication mode of the print server must match the network hub. For most situations, leave the product in automatic mode. Incorrect changes to the link speed and duplex settings might prevent the product from communicating with other network devices. If you need to make changes, use the product control panel.

NOTE: The setting must match with the network product to which you are connecting (a network hub, switch, gateway, router, or computer).

NOTE: Making changes to these settings causes the product to turn off and then on. Make changes only when the product is idle.

1.Touch the Setup button.

2.Scroll to and touch the Network Setup menu.

3.Touch the Link Speed menu.

4.Select one of the following options.

Setting

Description

 

 

Automatic

The print server automatically configures itself for the highest link speed and

 

 

communication mode allowed on the network.

 

 

 

10T

Half

10 megabytes per second (Mbps), half-duplex operation

 

 

 

10T

Full

10 Mbps, full-duplex operation

 

 

 

100TX Half

100

Mbps, half-duplex operation

 

 

 

100TX Full

100

Mbps, full-duplex operation

 

 

 

 

5.Touch the OK button. The product turns off and then on.

70

Chapter 5 Connect the product with Windows

ENWW