HP Smart Install for Windows wireless networks, method 1: Use the product control panel

NOTE: Use this method only if you know your wireless network SSID and password.

1.On the product control panel, touch the Wireless button. Touch the Wireless Menu button, and then touch the Wireless Setup Wizard item. Follow the instructions to complete the wireless setup.

2.On the product control panel, touch the wireless status button to display the product IP address.

3.At the computer, open a Web browser and type the IP address in the URL address bar to open the HP Embedded Web Server. Click the HP Smart Install tab and follow the onscreen instructions.

HP Smart Install for Windows wireless networks, method 2: Temporarily connect a USB cable

1.Connect an A-to-B type USB cable to the computer and the product. The HP Smart Install program might take a few minutes to start.

2.Follow the onscreen instructions. Choose the Wireless Network option for the installation type. Remove the USB cable when instructed.

HP Smart Install for Windows wireless networks, method 3: Use WPS

1.On the product control panel, touch the Wireless button. Touch the Wireless Menu button, and then touch the Wi-Fi Protected Setup item. Follow the instructions to complete the wireless setup.

2.On the product control panel, touch the wireless status button to display the product IP address.

3.At the computer, open a Web browser and type the IP address in the URL address bar to open the HP Embedded Web Server. Click the HP Smart Install tab and follow the onscreen instructions.

ENWW

Use HP Smart Install to connect to a computer, a wired network, or a wireless network

63

Page 79
Image 79
HP M375, M475 manual Enww