Patton electronic manual Model 2977 daughter board installation

Model 2977 DialFire RAS User Guide 3 • Installing the Model 2977 adapter

4.Remove the daughter card from its ESD protective packaging.

5.Using the screws provided, attach the four spacers to the DialFire adapter, on the side with the connector, as shown in figure 7 (below) and figure 8 on page 38. Be sure to install the spacers on the plated through- holes.

6.Plug the daughter card onto the DialFire adapter (see figure 7 and figure 8). The spacers should line up with the plated through-holes on the daughter card.

Mating

Connectors

Plated- through holes

Spacers

Screws

Figure 7. PCI Board: Installing the Daughter Card on the DialFire PTE Adapter

Model 2977 daughter board installation 37