C1553M-B (4/05) 119
Create a Custom Pattern as the Pattern to Match
Figure 147. Create a Custom Pattern to Match
1. Click the Pattern To Match tab.
2. Click Custom.
3. Type a description of the pattern in the Description field. If you save the pattern to the Predefined Patterns list (step 5), the description will
appear beside the pattern in the list.
4. Type the pattern. Refer to Pattern Syntax for information on creating patterns.
5. (Optional) Click Make Pre-defined to the pattern to the Predefined Patterns list. If you save the pattern, in the future you can select the
pattern from the list.
Select a Predefined Pattern as the Reset Pattern to Match
Note that you only need to complete these steps if the access control device sends a reset string to indicate that the alarm condition is no longer
in place.
Figure 148. Assign a Reset Pattern to Match
1. Click the Supports Reset Pattern field.
2. Click the Reset Pattern To Match tab.
3. Click “Pre-defined,” and then click Select. The Pre-defined Patterns list opens. Refer to Select a Predefined Pattern as the Pattern to Match
for a description of the predefined patterns provided by VMX300(-E).
4. Double-click the pattern that you want to use. The Pre-defined Patterns list closes, and the selected pattern appears in the Reset Pattern To
Match box.