Pelco C1553M-B What if Adding the DVR Failed?

C1553M-B (4/05) 77
Figure 83. Success or Failure Indication
10. Repeat steps 6 - 8 for each DX9000 DVR you want to be accessible to this user from this computer. If you are configuring the VMX300(-E)
server computer, make sure you add each DX9000 in the system. In a multipleserver system, add each DVR to exactly one server. Never add
a DVR to more than one server.
11. Click Close. The DX9000 Client Configuration Utility dialog box closes.
What if Adding the DVR Failed?
If the DX9000 Client Configuration Utility fails to add the DVR, the name of the DVR will appear in the “Failure on” field.
Figure 84. DX9000 Configuration Failure
The most common cause of failure is that the user is not in the Avusers group. If you have already successfully added the user to the Avusers
group, make sure you are logged in as the correct user. Log out and log back in, if necessary, then repeat the steps in Configuring Computers and
Users.
If the user has not yet been added to the Avusers group, follow the instructions in Adding Users to the Avusers Group, and then repeat the steps
in Configuring Computers and Users.