44 C1553M-B (4/05)
Figure 33. Autodiscover Warning
2. If you are sure you want to proceed, click Yes. The server adds the drivers it finds to the server configuration. The drivers appear in the
Object Browser.
EDIT A DEVICE DRIVER’S PROPERTIES
You can change the IP address and port number of a device driver, but not the driver’s name.
To change the properties of an existing device driver:
1. Navigate the Object Browser to [project name] > Device Drivers. Right-click the driver you want to edit and select Edit from the pop-up
menu. The Edit Driver Properties dialog box opens.
Figure 34. Edit Driver Properties Dialog Box
2. Edit the properties as desired. Refer to Add a New Device Driver for more information.
3. Click Synchronize. The Edit Driver Properties dialog box closes.
DELETE A DEVICE DRIVER
1. Navigate the Object Browser to [project name] > Device Drivers. In either pane, right-click the driver you want to delete and select Delete
from the pop-up menu. The Confirm dialog box opens.
2. If you are sure you want to delete the device driver, click Yes. The selected driver is deleted and the Confirm dialog box closes. All the
driver’s devices are deleted and their icons removed from maps.
NOTE: Changes to device drivers, such as autodiscovering drivers, come into effect immediately. You cannot discard your changes by
exiting configuration mode without saving.
NOTES:
•Changes to device drivers, such as deleting a driver from the server configuration, come into effect immediately. You cannot discard
your changes by exiting configuration mode without saving.
•Deleting a device driver deletes all the devices of that type and removes their icons from maps. This introduces an error into scripts
that refer to one of the deleted devices.
•Deleting a device driver is irreversible. If you delete a device driver and then change your mind, you must add it back as described in
Add a New Device Driver or Autodiscover Device Drivers. Any devices that were configured before you deleted the driver will auto-
matically be added to the server configuration when you add the driver back.