Pelco C1553M-B - page 76

76 C1553M-B (4/05)
5. Click Build a list of local servers, and then click Custom naming.
6. Type the name of the DX9000 DVR in the Custom naming field. If you do not know the name of the DVR, you can find it out by right-clicking
the My Computer icon on the Windows desktop and selecting Properties from the pop-up menu. Click the Network Identification tab. The
DVR name is the first part of the full computer name. For example, if the full computer name is pelco1.admin1.corwayfacility, then the
DX9000 DVR name is pelco1.
Figure 81. Entering DX9000 Name
7. Click Add. The name of the DX9000 DVR will move to the box below the Custom naming field.
Figure 82. Adding DX9000 Name
8. Click Configure. You will be asked whether you want to change the settings.
9. Click Yes. If the configuration was successful, the name of the DVR will appear in the “Success on” field. A message saying the operation
was completed will appear. Click OK to acknowledge the message. If the DVR name appears in the “Failure on” field, refer to the What if
Adding the DVR Failed? section.