234 C1553M-B (4/05)
EDIT AN ALARM/EVENT LABEL
1. Right-click the alarm/event label, and select Edit Label from the pop-up menu. Make sure you position the pointer over the label, not the
icon, before right-clicking.
Alternatively, navigate the Object Browser to [project name] > Alarms and Events > [alarm/event category name]. In the right pane, double-
click the desired alarm or event, or right-click the alarm or event and select Edit from the pop-up menu, then click Edit Label. The Edit Label
Properties dialog box opens.
Figure 256. Edit Label Properties Dialog Box
2. Change properties of the label as desired. Refer to Add a New Alarm or Event for information on specific properties.
3. Click OK. The Edit Label Properties dialog box closes.
REMOVE AN ALARM/EVENT LABEL
Removing an alarm/event label from one icon removes the label from all icons representing that alarm or event, whether the icons are on the
same map or different maps. If you change your mind after removing an alarm/event label, you can add it back as described in Add a New Alarm
or Event.
With the desired map loaded, right-click the alarm/event label you want to remove and select Remove from the pop-up menu. Make sure you
position the pointer over the label, not the icon, before right-clicking. The alarm/event label disappears from the map and “Display the label for
this alarm or event” is cleared in the alarm/event properties. The icon is unaffected.