Pentax 430RS, 330RS manual EV Compensation, Changing the Shutter Speed/Aperture Setting

e04KB335_33e.qk 6/6/02 4:39 PM Page 60 (1,1)

Setting the position of the autofocus (AF) area

When the mode is set on , the position of the autofocus (AF) area can be changed.

The AF area moves upward.

The AF area moves downward.

The AF area moves to the left.

The AF area moves to the right.

Press the Playback/OK button to determine the position of the AF

z

EV Compensation

You can take pictures that are intentionally overexposed or under-

Taking Pictures

area.

memo When the mode is set on , the AF area is automatically set on spot. In this case, the AF spotbeam will not be emitted.

Changing the AF Area (Focusing Area) p.67

exposed.

zPress the four-way controller

( ) in Capture mode.

Four-way controller ( ) increases the EV compensa- tion to a positive (+) level

Four-way controller ( ) decreases the EV compensa- tion to a negative (–) level

198

6/10/2002

–1.0 11:19

EV compensation level

Taking Pictures

memo

The set level is displayed on the

LCD monitor.

• If you set to ± 0, the set level displayed on the LCD monitor will go off after three seconds.

•When [EV Compensation] on the [Memory] menu (p.74) is not turned on, the set value goes back to ±0 when you turn off the

power.

Saving the EV Compensation p.74

Caution This function cannot be used in Manual Exposure mode.

Changing the Shutter Speed/Aperture Setting

See “Taking Pictures Manually (Manual Exposure Mode)” (p.36).

60 61